Shop
SuperF-UT end mills Al-F
- 3-flute with increased flute space
- also suitable for unstable and difficult machining conditions
- achievable surface finish Ra = 2 to 3 µm
- aluminium and aluminium-alloys as well as other long-chipping non-ferrous metals
- optimised micro geometry
- neck clearance
- centre cutting
- the unequal helix achieves smooth, chatter-free operation
| P | M | K | N | S | H |
|---|---|---|---|---|---|
 | |||||
| ISO codes | |||||
ISO Codes
×| P | Steel, high-alloyed steel |
|---|---|
| M | Stainless steel |
| K | Grey cast iron, spher, graphite/mall. cast iron |
| N | Aluminium and other non-ferrous metals |
| S | Special, super and titanium alloys |
| H | Hardened steel and chilled cast iron |
Optimal suitability
Limited suitabilityAvailable Options:
Description
Connection code machine side: DIN 6535-HA
Tolerance on Ø: js9
Internal cooling: without
Standard: Company std.
Surface: bright
Discount group: 106
Type: 54570
Cutting direction: right-hand
Type: SuperF-UT Al-F
Tool material: Solid carbide
No of cutting edges: 3
Standard 2: ~DIN 6527L
Form: A
Helix angle: 29/30/31
Additional information
| Nominal Ø mm | 6.000, 8.000, 10.000, 12.000, 16.000, 20.000, 25.000 |
|---|---|
| Shank Ø | 6.000, 8.000, 10.000, 12.000, 16.000, 20.000, 25.000 |
| Neck Ø | 11.500, 15.500, 19.500, 24.000, 5.700, 7.700, 9.500 |
| Total length | 57.000, 63.000, 72.000, 83.000, 92.000, 104.000, 121.000 |
| Cutting edge length | 13.000, 19.000, 22.000, 26.000, 32.000, 38.000, 45.000 |
| Usable length | 20.000, 26.000, 30.000, 36.000, 42.000, 52.000, 63.000 |
| Groove length | 20.000, 26.000, 30.000, 36.000, 42.000, 52.000, 63.000 |
| Chamfer length | 0.060, 0.080, 0.100, 0.120, 0.160, 0.200, 0.250 |
